Detailed Product Description

Dryspell

• Microprocessor Controller
• Prerfilter rating 0.3 microns (coalescer)
• Shuttte valve for Low Pressure drop
• AH Aluminium resist curidatinn & scale formation
• Dewpoint better than -400 C
• Design Patented

Desiccant Dryer offers total cleaning solution for lubricated as well as non-lubricated compressed Air,

Principle of Operation

Drying Cycle ; Moist air from the compressor is sent through the  coalescing filter.   Here water & oil coalesces, gets purged through the auto drain valve.

The relatively clean at with water vapour passes through the aluminium drying tower filled desiccant gets completely dried (upto 400C dew point) and then passes through a built in after filler The desiccant fines from the towers are completely removed and dean dry air is let out through the outlet port for use.

Regeneration Cycle : During the regeneration cycle. The sudden depressurisation brings out water molecules trapped m the Desiccant pores to the surface of the beads, A small portion dry compressed air  from the drying TOWER then passes Over the desiccant through the regeneration orifice built in the Top Block. This results in complete regeneration of the Discount.

Typical Application

• Paint spray booths
• Tool, Valve, Cylinder protection
• Food packaging machine
• Auto Garage
• Textile & Garments
• SPM
• Instrumentation

Specifications

• Maximum Working Pressure - 16 kg / cm2
• Air Inlet Condition - Maximum Fluid Temperature 450C
• Pre-filter rating - 0.3 Microns (Coalescer)
• Cycle Time - 4 Minutes
• Regeneration Volume - 10%
• Air Outlet Conditions - Dry air at  -400C  Dew Point
• Operating Voltage - 85 - 265 V 50 / 60 hz l Ph